Australian Jensen Forums

For owners of Jensen Cars from Australia and around the world.

electronic distributor

Lucas... Say. No. More.

by ji440wa » Sun Oct 13, 2019 1:09 pm

HI GUYS, THE BENEFITS OF AN ELECTRONIC DISTRIBUTOR FOR MY JENSEN???
I WOULD LOVE TO HAVE IT START WITH LITTLE FUSS BUT IT DOESN'T BEHAVE SOMETIMES. ELECTRONIC WAS SUGGESTED TO ME RECENTLY, THOUGHTS PLEASE.
WAYNE FROM SUNNY PERTH
2241/9411
JI440
ji440wa
 
Posts: 2
Joined: Fri Jun 07, 2019 10:13 am

by Interceptor3 » Sun Oct 20, 2019 11:13 am

Completely worth it. I bought one from eBay and it didn't fit properly, had to get another one, so would recommend going to a good brand and supplier even though it will cost more.

Welcome to the forum too!
Nigel Honey
Hobart, Tasmania
'72 Jensen Interceptor Mk3 128/4633
'08 Mitsubishi Lancer Evolution X MR
User avatar
Interceptor3
Site Admin
 
Posts: 499
Joined: Thu Feb 03, 2011 7:46 am
Location: Hobart

by Paulio » Fri Oct 25, 2019 6:18 am

I,ve gone down the Holley Sniper EFI path so I am going to chase a Holley dizzy that can be controlled and intergrated with the EFI computer. But there's a few good ones to be had MSD etc, let google help you.....
User avatar
Paulio
 
Posts: 121
Joined: Thu Feb 17, 2011 12:59 pm
Location: Melbourne

by Paulio » Fri Oct 25, 2019 6:19 am

What brand did you end up with Nig?
User avatar
Paulio
 
Posts: 121
Joined: Thu Feb 17, 2011 12:59 pm
Location: Melbourne

by Interceptor3 » Sun Oct 27, 2019 1:53 pm

Paulio wrote:What brand did you end up with Nig?


Honestly couldn't tell you, it was just something generic and basic from eBay. Actually the first one that came didn't fit, the shaft was too short. I can't remember if they replaced it with another or I bought a different one from Pentastar, but it is nothing fancy, not a brand name and just a drop in replacement with no control box/computer, just a distributor with modules and no points.
Nigel Honey
Hobart, Tasmania
'72 Jensen Interceptor Mk3 128/4633
'08 Mitsubishi Lancer Evolution X MR
User avatar
Interceptor3
Site Admin
 
Posts: 499
Joined: Thu Feb 03, 2011 7:46 am
Location: Hobart


Return to Electrical

cron

Who is online

Users browsing this forum: No registered users and 1 guest

View new posts